PRODUCTS

The capacity of 0 – 1 inch aggregate manufacturing, which used to be 100 tonnes/hour when the company was founded, has been increased by 10 times in the last 30 years and is now 1,000 tonnes per annum.
The annual sales volume is between 1,200,00 tonnes and 1,500,000 tonnes, depending on the market conditions.

The manufactured products are as follows:

0 - 5 mm     (0 - #4)                       Crushed rock powder or Type 0 (zero) fine aggregate,
5-13 mm     (#4 - 1/2 inch)           Type 1(one) aggregate,
13-19 mm   (1/2-3/4 inch)           Type 2 (two) aggregate,
19-25mm    (3/4 - 1 inch)             Type 3 (three) aggregate,
25-38 mm    (1-1 1/2 inch)          Type 4 (four) aggregate.

This classification has been categorized by taking into account the market conditions, and it meets the standards of the American Society for Testing and Materials (ASTM).

The sub-base materials (0.0 – 3.0 inches; 0.0 – 2.5 inches; 0.0 – 2.0 inches) and the base materials are manufactured upon request.

The plant mix material is also manufactured upon request.

We have four different types of customers:
1. Asphalt manufacturers,
2. Ready-mixed concrete manufacturers,
3. Infrastructure and superstructure building contractors, and
4. Municipalities and the companies that deal with the municipality-related businesses.
The Manufacturing Plant: Our company has three crushing and screening plants, which have similar types but have different capacities.

- One crushing and screening plant with the capacity of  500 tonnes/hour (0.000 – 0.196 inch), which consists of a bunker, a feeder, a jaw crusher, an impact crusher, two 80 inches x 240 inches multi-deck screens and one impact crusher for recycling purposes.

- Two crushing and screening plants with the capacity of 250 tonnes/hour (0– 1 inch) that have the same systems and the equipment as the crushing and screening plant with the capacity of  500 tonnes/hour (0.000 – 0.196 inch), however, the jaw crushers and the screens are smaller.

Our company has the following equipment:
- Four Volvo L180 (C-E-F-G) loaders, each of which weighs 30 tonnes,
- Three Hitachi ZAXIS 400 excavators, each of which weighs 40 tonnes,
- One Furukawa HCR 1200 truck drill: 3.280ft/minute if the drilling radius is 3 inches; 2.296ft/minute if the drilling radius is 4 inches.

- 16 Mercedes AXOR 3340 6x6 dump trucks, each of which weighs 33 tonnes, 400hp.

- One 1600 KWA power distribution unit.
Reklammania